St Cloud Screen Enclosures Trusted Installation, Repair & Rescreening Company

St Cloud Screen Enclosure company builds, repairs, and rescreens pool cages, patio enclosures, and lanais for homeowners throughout St Cloud and the surrounding Osceola County area.

We handle full enclosure installations, panel replacement, screen door repair, and pet door additions using materials selected to hold up in Florida's heat, humidity, and storm season. Outdoor space in Central Florida works best when it's usable. An enclosure keeps mosquitoes out, cuts down on leaves and debris in the pool, reduces cleaning time, and adds a layer of shade without blocking airflow or the view. Whether you're planning a new screen enclosure from scratch or dealing with torn panels after a windy week, we can walk you through the options, materials, and timeline. Here's what we offer and what to expect when you work with us.

Receive a FREE Quote

Clear, Upfront Pricing: Detailed estimates for screen enclosure installation, repair, and rescreening with no hidden fees or surprise charges.

Installation Done Right: Proper framing, secure screen panels, quality hardware, and careful workmanship for pool cages, patios, porches, and lanais.

No Job Too Big or Small: From torn screens and damaged panels to pool cage repair, rescreening, frame repair, and full screen enclosure restoration.

Local Screen Enclosure Experts: Familiar with St Cloud permitting, wind-load requirements, and Florida building codes.

Premium, Florida-Rated Materials: Heavy-duty aluminum framing and durable screen materials selected for humidity, salt air, high winds, and storm season.

Screen Enclosure Installation

We build and install screen enclosures across St. Cloud, Kissimmee, and the surrounding Osceola County area, from full pool cages to single door replacements. Every project starts with a site measurement, a review of your existing slab or footer, and framing specifications that meet local wind load requirements.

Pool Screen Enclosure Installation

A pool cage helps keep leaves, frogs, mosquitoes, and debris out of the water while reducing skimming and maintenance. We build mansard, gable, and dome-style pool screen enclosures using 2x2 or 2x3 extruded aluminum framing, with heavier 2x5 or 2x7 beams for longer spans and higher loads. Enclosures are anchored to the existing pool deck or a new footer using engineering-based fastener spacing. Options include 18x14 fiberglass mesh or tighter no-see-um screen, white, bronze, or satin finishes, pool-safe door placement, and aluminum kick plates to protect lower panels from feet, hoses, pets, and equipment.

Patio & Porch Screen Enclosure Installation

Screening a patio or front porch is typically faster than building a full pool cage, but proper framing and anchoring still matter. We attach the enclosure to the home’s existing wall and roof structure when possible to reduce slab posts and keep sightlines open. If the slab edge is cracked or too thin, we can recommend a new footer or slab extension before installation. Front porch enclosures usually use lower-profile aluminum framing to blend with the home, while rear patio enclosures can accommodate larger screen panels and wider door openings. Panel sizes are planned for even spacing so the finished enclosure looks clean and balanced.

Lanai Screen Enclosure Installation

Lanais in St. Cloud are often covered by the home’s existing roof, so installation focuses on custom-framed screen panels fitted to each opening. We measure every bay, account for slab slope, and size the aluminum framing precisely so the mesh stays tight and the finished enclosure looks clean. Popular upgrades include kick plates for lower-panel protection, pet-resistant screen, privacy mesh, and wider screen doors for grills and furniture. If the existing lanai framing is still structurally sound, lanai rescreening is often the more cost-effective option than a full rebuild.

Aluminum Screen Enclosure Installation

We use extruded aluminum framing for screen enclosures because it resists corrosion, humidity, and rot in Florida’s climate. Frame sizes are selected by span and load, typically 2x2 for screen panels and door frames, 2x3 for standard uprights and headers, and 2x5 or 2x7 for longer spans and roof-support beams.

Durable powder-coated finishes are matched to existing framing when possible. Connections use engineering-specified fastener spacing, with stainless or coated hardware in areas exposed to pool chemicals and moisture for added corrosion resistance.

Screen Room Installation

A screen room is a fully enclosed outdoor structure with its own roof, typically added to the back or side of the home. We install insulated aluminum roof panels or pan roofs based on span and insulation needs, with either full-screen walls or screen above a knee wall for a more finished look. If no slab exists, we can coordinate the concrete foundation or slab pour and allow proper cure time before framing. Screen room projects in Osceola County generally require engineered drawings, permits, and inspections, which we handle as part of the installation process.

Custom Screen Enclosure Installation

For backyards with curved decks, multi-level slabs, outdoor kitchens, irregular rooflines, or tight equipment areas, we build custom screen enclosures around the actual site conditions. We field-measure the space, create a layout, and position posts to clear obstacles such as planters, downspouts, and pool equipment. Custom designs can also accommodate taller entries, diving-board clearance, second-story tie-ins, and varying roof heights. Panel size, beam depth, span, and post spacing are engineered for the specific dimensions of your property rather than a standard enclosure template.

Clear View Pool Enclosure Installation

Clear-view screen enclosures, also called panoramic or picture-window pool cages, use fewer horizontal cross members to create larger screen panels and more open views of the yard, lake, or surrounding landscape. Because these wider spans carry greater wind loads, we use deeper aluminum beams, reinforced framing, and site-specific engineering to control deflection and maintain structural strength. Clear-view enclosures typically cost more than standard pool cages, but they offer a cleaner, less obstructed sightline. Before fabrication, we review the panel layout so you know exactly where the remaining posts and beams will be positioned.

Pool Fence Installation

Removable mesh pool fencing creates a separate safety barrier between the pool and the rest of the yard, independent of the screen enclosure. Fence sections install into deck sleeves and can be removed when you want the area fully open. Typical systems are about 4 feet high and can include self-closing, self-latching gates. Because Florida’s Residential Swimming Pool Safety Act requires an approved barrier for most residential pools, a compliant removable pool fence can be one accepted option. We measure the pool perimeter, review the deck surface, set proper sleeve spacing, and tension the mesh to prevent sagging. Mesh and post colors can also be selected to complement the surrounding deck and pool cage framing.

Motorized Patio Screen Installation

Motorized retractable screens provide flexible shade, insect protection, and privacy for covered patios and lanais while preserving an open view when retracted. Systems can be header-mounted or recessed into the soffit, with tensioned side tracks for better wind resistance and controls via wall switch, remote, or smart-home integration. Screen options include insect mesh, solar screen fabric, and clear vinyl for additional weather protection. Single units commonly span openings up to about 20 feet wide; larger openings are typically divided into two retractable screens with a center post or shared header.

Your Screen Enclosure Installation Company

in St Cloud

Our St. Cloud screen enclosure installation process follows local permitting, Florida Building Code, and Osceola County wind-load requirements. We install pool cages, patio enclosures, screened porches, lanais, and custom screen rooms using durable aluminum framing, screen mesh, and fastening systems built for Central Florida heat, humidity, heavy rain, insects, and storm exposure.

Receive a FREE Quote Services

Screen Enclosure Repair Services

Torn panels, rusted fasteners, bent framing, and sagging doors are the most common problems we see on St. Cloud enclosures, and each one has a different fix. We repair single panels, rebuild damaged sections, and rescreen entire cages using Phifer screen and matching aluminum components.

Pool Screen Repair & Rescreening

Pool cage screen in Central Florida typically lasts about 7–12 years before UV exposure makes the mesh brittle, faded, and more prone to tearing. When the screen reaches that stage, repeated patching becomes less effective because weakened mesh can split around old repairs. We handle both spot screen repair for a few damaged panels and full pool cage rescreening when the mesh has deteriorated throughout. For complete rescreens, we use American-made Phifer screen, clean the frame channels, and replace the spline in every section. We can also combine mesh types, such as 18/14 fiberglass screen on upper panels with pet-resistant mesh near doors, walkways, and other high-traffic areas.

Patio and Porch Screen Enclosure Repair

Patio and porch screen enclosures are often damaged by furniture, grills, lawn equipment, and foot traffic, with lower panels usually wearing out first. We can replace only the damaged bottom sections when the upper screen is still in good condition, keeping repair costs focused on the actual problem.

We also repair the framing behind repeat screen failures, including loose chair rails, separated corner joints, and wall fasteners that have backed out. For high-traffic porches, adding a mid-height chair rail can make future screen panel replacement easier and more affordable.

Aluminum Frame Repair

Bent uprights, separated corners, and sagging beams can weaken the entire screen enclosure frame, so these are structural repairs rather than cosmetic fixes. We inspect each damaged member to determine whether it can be straightened or needs replacement; creased or kinked aluminum is typically cut out and replaced with matching extrusion. Our screen enclosure frame repair work includes replacing bent uprights, re-securing header beams, installing new corner brackets and gussets, splicing damaged sections, and re-anchoring posts to the deck. We match the existing aluminum profile, gauge, and finish so the repair works with the original hardware and screen channels.

Rusted or Corroded Frame Repair

Aluminum screen enclosure framing resists rust, but steel screws and anchors can corrode, especially at base plates, wall connections, and areas exposed to standing water or pool chemicals. Rust streaks on an upright often indicate failing hardware rather than damaged aluminum. We replace corroded fasteners with stainless steel hardware, reset loose base plates, and splice in new aluminum where pitting has weakened the frame. Addressing corrosion early helps prevent uprights from shifting under wind load and can keep the repair limited to a single post instead of a larger structural section.

Lanai Screen Repair

Lanai screen enclosures attach directly to the home, making the wall and header connection a common repair point. We inspect fasteners where the aluminum frame meets block or stucco, since water intrusion can loosen anchors and cause hidden corrosion. Common lanai screen repairs include rescreening sagging panels, replacing spline, installing new Tapcon anchors with polyurethane sealant, resetting sliding door frames with new gaskets, and straightening or replacing bowed uprights. We also match existing frame finishes—typically white, bronze, or bare aluminum—so repairs blend with the original enclosure.

Screen Panel Replacement

Single screen panel replacement is one of the most common screen enclosure repairs and is ideal when damage is limited to one section. We remove the torn mesh and old spline, clean the frame channel, install new screen, and roll in fresh spline for proper tension.

Mesh options include 18/14 fiberglass for airflow and visibility, 20/20 no-see-um mesh for gnats and midges, pet-resistant screen for high-traffic areas, and Florida Glass privacy screen for lower panels and equipment zones. Most single-panel repairs are completed in one visit, with the mesh type and color matched to the surrounding enclosure for a clean finish.

Screen Door Repair & Replacement

Screen enclosure doors see constant daily use, making them one of the most common repair needs. We fix dragging doors, failed latches, worn rollers, damaged hinges and closers, torn screen panels, and pet damage, including upgrades to pet-resistant mesh or added pet doors. For sliding screen doors, we replace worn rollers and wheels; for swing doors, we service hinges, closers, handles, latches, and strikes. If the door frame is bent or the corners have separated, a full screen door replacement is usually more reliable than another repair, and we install a new unit sized to the existing opening.

Storm-Damaged Screen Enclosure Repair

High winds can blow out screen panels, bend uprights, and even collapse sections of a pool cage or screen enclosure. After a storm, we inspect the entire structure—not just the visible damage—and document each panel, beam, upright, and anchor for insurance claims when needed. Our storm damage screen enclosure repairs range from replacing blown-out panels to rebuilding collapsed sections with new aluminum beams, uprights, and anchors. We stabilize the frame and anchoring first, then complete the rescreening, so the enclosure is structurally secure before new mesh is installed.

Screen Roof Repair

Screen enclosure roof panels take the most sun, debris, and storm exposure, so they often fail before wall screens. Oak limbs, palm fronds, leaves, and trapped moisture can puncture mesh and accelerate deterioration. We provide pool cage roof repair by replacing torn roof panels, straightening bent purlins, and re-securing loose cross members without loading the existing frame. If the roof mesh is brittle throughout, a full roof rescreen is often more practical than repeated patching. Heavier-duty screen can also be installed beneath overhanging trees for added durability.

Specialty Screen Enclosure Services

We provide specialized screen enclosure repair, rescreening, structural reinforcement, and custom enclosure work in St. Cloud, FL for pool cages, lanais, screen rooms, patios, doors, roofs, and aluminum framing. Services are tailored to Central Florida conditions, including strong UV exposure, heavy rain, humidity, pool chemicals, and seasonal storm damage.

Pool Cage Rescreening

Pool cage mesh in Central Florida typically lasts 5–10 years before UV exposure makes it brittle and prone to tearing. We handle both individual panel replacement and full pool cage rescreening, using Phifer products such as 18x14 fiberglass, 20x20 no-see-um mesh, pet-resistant screen, and Florida Glass for privacy areas. During full rescreens, we replace the spline throughout rather than reusing aged material that can cause panels to loosen prematurely.

Lanai Screen Enclosures

We build and repair lanai screen enclosures under existing rooflines or new insulated and pan-roof systems. Common layouts include under-truss lanais, attached roof lanais, and two-story enclosures. Framing is anchored to the home and slab, with beam and column sizing based on span and Osceola County wind-load requirements. Larger openings may require knee braces or additional columns for proper support.

Screen Room Additions

A screen room addition creates new enclosed outdoor living space over an existing or new slab. We coordinate slab work, permitting through Osceola County or the City of St. Cloud, aluminum framing, roofing, screening, drainage, and electrical rough-in for fans or outlets. Roof options include pan roofs for shorter spans and insulated aluminum panels that help reduce heat gain and support ceiling fixtures.

Specialty Screen Panel Replacement

When full rescreening is unnecessary, we replace individual panels with mesh selected for the specific problem. Options include pet screen, golf ball screen, tear-resistant mesh, Florida Glass, and solar screen for west-facing walls. Different mesh types can be combined within one enclosure, with consistent spline sizing and matched framing for a uniform fit.

Custom Patio Enclosures

We design custom patio screen enclosures for irregular slabs, curved pool decks, angled walls, landscaping, and non-standard rooflines. Options include picture-window framing, mansard or gable roofs, aluminum or Florida Glass kickplates, and integrated access panels. Every project is field-measured before fabrication, with framing available in white, bronze, or bare aluminum.

Screen Door & Roof Replacement & Repair

We repair and replace screen enclosure doors, hinges, closers, latches, handles, door frames, and pet doors. Roof work includes replacing damaged pan or insulated roof panels, resealing seams, repairing gutters, and correcting leaks caused by failed sealant or loosened fasteners. Door and roof components are serviced based on condition rather than replaced unnecessarily.

Specialty Aluminum Frame Repair

Enclosure Reinforcement

Older screen enclosures may have lighter framing, fewer anchors, or weaker connections than newer systems. Reinforcement can include heavier headers, super gutters, knee braces, additional deck anchors, upgraded uprights, and cable or strap tie-downs at roof connections. We evaluate the existing structure first and reinforce the specific weak points, which can be more practical than a full enclosure rebuild.

Storm-Damaged Enclosure Repair

After hurricanes and tropical storms, we assess both visible and hidden damage to screen panels, uprights, beams, anchors, and roof sections. We document conditions with photos and provide an itemized repair scope that can support insurance claims. Structural issues are addressed first, followed by rescreening, and we correct compromised anchors or connections that may have contributed to the failure.

Why We're the Best Screen Enclosure

Company in St Cloud

We build screen enclosures in St. Cloud with a measured process: an on-site evaluation, engineered drawings, permitting through Osceola County, and installation by our own crews. The materials we use — aluminum framing, fasteners, and screen mesh — are selected to handle Florida humidity, UV exposure, and wind loads.

Receive a FREE Quote

What Does Our Expert Screen Enclosure Process Involve?

We start with a free on-site measurement of your pool deck, patio, or lanai. Slab condition matters here, since anchor placement depends on concrete thickness and edge distance. From there, we prepare a layout showing panel spacing, door locations, and roof style - mansard, gable, or flat. Our next step is engineering and permitting. St. Cloud requires sealed plans and inspections, and we handle the submittal and schedule the inspections ourselves. Installation typically runs two to five days for a standard pool enclosure, depending on size and weather. We finish with a walkthrough: checking door closers, screen tension, gutter alignment, and self-closing latches required by Florida pool barrier codes.

Once the permit is issued, we schedule installation in a set sequence:

Anchoring: base plates and columns secured to the slab
Framing: beams, purlins, and chair rails assembled
Screening: spline-installed panels, door hardware set
Inspection: final county sign-off

Most residential lanai enclosures take two to four days of on-site labor. Pool cages with mansard roofs generally require longer.

Receive a FREE Quote

Which Materials Do We Provide for Screen Enclosures?

We frame with 6063-T6 extruded aluminum in 2" x 2" through 2" x 9" profiles, sized according to span and wind load. Powder-coated finishes are available in white, bronze, and satin black.

We also install insulated aluminum roof panels for covered patios, plus kickplates along the bottom sections where damage is most likely to occur. Fasteners are stainless steel or coated to resist corrosion, and we use structural screws rated for the uplift values listed on the engineered plans.

Receive a FREE Quote

Screen Type	Best For
Standard Fiberglass (18x14)	Standard insect protection
No-see-um (20x20)	Blocking smaller gnats and midges
Florida Glass (Vinyl-laminated)	Privacy and rain deflection on lower panels
Pet-resistant mesh	Homes with dogs or cats
Solar Screen (60-90%)	Reducing heat and glare on west-facing lanais

Planning & Timeline

Most screen enclosure projects in St. Cloud move from the first site visit to final inspection in four to eight weeks, with permitting accounting for a large share of that window. Below we break down what happens at each stage, how we measure your space, and how the layout is decided before a single post goes up.

How Long Does Screen Enclosure Installation Take?

The physical build is usually the shortest part of the project. A standard patio rescreen takes one day. A new patio or porch enclosure of 200 - 400 square feet typically takes 2 - 4 days of on-site work. Full pool cages with mansard or gable roofs generally run four to seven days, depending on height and span.

The full calendar timeline looks different because of permitting through Osceola County or the City of St. Cloud:

Phase	Typical Duration
Site visit and quote	1-3 Days
Design and engineering drawings	3-10 Days
Permit review and approval	2 - 4 Weeks
Material fabrication and delivery	1 - 2 Weeks
Installation	1 - 7 Days
Final Inspection	3 - 7 Days

Weather and county review backlogs are the two variables that shift these numbers most often.

Receive a FREE Quote

Custom Screen Enclosure Installation Timeline

Custom structures add steps that stock designs skip. When your enclosure requires an engineered wind load calculation, a new concrete footer, or a non-standard roof pitch, we build in additional time for drawings and review

Here is how a custom pool cage typically progresses:

Week 1: Site Measurement & Consultation

Field measurements, design review, material options, and written estimate.

Weeks 1–2: Custom Design & Engineering

Final layout, roof configuration, structural calculations, and engineered drawings.

Weeks 2–3: Permit Submission

Plans are submitted for local permitting and required review.

Weeks 4–6: Permit Approval & Site Preparation

Permit approval, material ordering, and any required concrete footer or slab work.

Week 7: Frame & Screen Installation

Aluminum framing is assembled, anchored, and screened.

Week 8 — Final Inspection & Walkthrough

Final county inspection, punch-list review, and homeowner walkthrough.

Projects requiring a new slab add roughly seven to ten days for pouring and cure time. We confirm all dates in writing before work begins.

Screen Enclosure Design Process

Design starts with how you plan to use the space. A screened lanai for morning coffee has different requirements than a pool cage that needs to clear a diving board and meet setback rules.

We discuss four decisions with every client:

Structural Type

Flat pan, mansard, gable, or hip roof

Framing Size

2x2 for small patios, up to 2x9 for wide-span pool cages

Screen Mesh

18/14 standard, 20/20 no-see-um, or pet-resistant panels

Openings

Door placement, kickplate height, and window panel layout

Frame color is usually bronze or white in St. Cloud neighborhoods. We also check HOA guidelines early, since some communities in the area restrict color and roof style.

Measuring Your Space for Screen Enclosures

Accurate field measurements prevent the two most common problems: panels that do not seat properly and structures that violate setback requirements.

Our measurement visit covers:

Measure the Slab: Slab dimensions, including any slope or drainage pitch

Check Existing Footers: Verify footer depth, width, and condition to determine whether the structure can be properly anchored.

Inspect Attachment Points: Measure and evaluate fascia, block walls, truss lines, and other areas where the screen enclosure will connect to the home..

Confirm Height & Clearance: Check soffit, eave, roofline, and door clearances to ensure the framing and screen panels fit correctly.

Verify Setbacks & Easements: Measure property-line distances and identify easements or restricted areas that could affect permitting or screen enclosure placement.

We check the slab for level across its full length. A slab that drops more than an inch over 20 feet changes how posts are cut and anchored. Measurements are taken on site, never from a plat drawing alone. Osceola County requires a survey for most new enclosure permits, and we use it alongside our field numbers.

Screen Enclosure Layout and Planning

Layout determines where uprights land, how panels are divided, and where you walk through. Post spacing is driven by wind load. In St. Cloud, enclosures are engineered for the local design wind speed, which generally means uprights every 5 to 8 feet depending on frame size and screen height.

A few planning points worth settling early:

Door swing — outward-opening doors are standard, but confirm clearance from pool coping and walkways
Panel width — narrower panels resist wind better; wider panels give clearer views
Kickplate placement — helpful at high-traffic doors and along pet paths
Gutter and downspout routing — downspouts often need rerouting around new posts

We mark post locations on the slab with chalk before installation so you can see the layout in place and request changes at no cost.

Receive a FREE Quote

Cost & Budget

Screen enclosure pricing in St. Cloud depends on square footage, frame gauge, mesh type, and the wind-load engineering required by Osceola County. Below we break down current price ranges, what drives them, and how we structure payments so you can plan realistically before signing anything.

Screen Enclosure Pricing Guide

Most contractors in our area price enclosures by the square foot of screened area, then adjust for height, roof style, and structural requirements.

Project Type	Typical Range
Rescreening an existing enclosure	$1,200 – $4,500
Patio or lanai screen enclosure	$4,000 – $12,000
Pool cage (new build, standard size)	$12,000 – $30,000
Screen room with insulated roof	$3,000 – $10,000
Single-panel replacement	$50–$250+

New aluminum screen enclosures in St. Cloud commonly range from about $10–$30+ per square foot, depending on enclosure type, height, roof design, engineering, and wind-load requirements. Standard patio enclosures typically fall toward the lower end, while taller pool cages, gable roofs, and picture-window designs cost more.

Receive a FREE Quote

How Much Do Screen Enclosures Cost?

Several specific variables move your number within those ranges.

Frame Size

2x2 framing works for smaller patios. Pool cages over 10 feet tall typically require 2x3 or 2x5 super gutter beams, adding material cost.

Mesh Selection

Standard 18x14 fiberglass is the baseline. No-See-Um 20x20 mesh runs about 15–25% more. Pet-resistant screen and Florida Glass panels cost more still.

Wind Rating

Osceola County sits in a 130–140 mph design wind zone. Engineering, anchor spacing, and heavier extrusions are code requirements here, not upgrades.

Site Conditions

Existing footers, deck condition, and slab thickness affect prep. Concrete work adds $2,000–$6,000 when a new footer is needed.

Screen Enclosure Budget Planning

Receive a FREE Quote

We recommend building your budget in 3 parts: structure, permitting, and finishing details.

Base structure — framing, mesh, hardware, and labor. This is usually 70–80% of total cost.
Permits and engineering — sealed drawings and Osceola County permit fees typically run $500–$1,500.
Contingency — set aside 10% for slab repair, drainage corrections, or fascia replacement discovered during installation.

If your pool project is still in progress, coordinate the enclosure early. Pouring a deck with the cage footprint already planned is less expensive than cutting and retrofitting footers later.

For rescreens, budget by panel count. Measure your cage and count panels before calling for quotes — it makes comparison much easier.

Screen Enclosure Cost vs. Stock Alternatives

Homeowners often compare a custom enclosure against prefabricated or temporary options.

Stock Alternatives

Prefabricated screen enclosure kits can cost less upfront and may work for simple rectangular patios on flat slabs. However, stock sizes often require compromises around pool shapes, rooflines, and door placement, and many kits do not include the sealed engineering needed for Florida wind-load requirements. Lighter aluminum extrusions, non-structural fasteners, and limited warranty coverage can also reduce long-term value

Screen Enclosures

A custom screen enclosure typically costs about 20–35% more upfront than a stock kit, but it is measured to your property, engineered for local wind loads, and permitted to meet applicable Florida code requirements. Custom framing also avoids the fit issues and correction costs that can arise when a prefabricated enclosure does not pass inspection or properly match the existing slab and roofline.

Our custom enclosures are measured to your slab, tied into your existing structure, and specified to pass inspection. The material cost is higher, but total installed cost is frequently comparable — and the fit is exact.

Hidden Screen Enclosure Costs

These items surprise homeowners most often, so we identify them during the estimate rather than after work starts

Permits & Plan Reviews

Required for new enclosures and most structural repairs in St. Cloud. Rescreens generally do not require one.

Footer work:

Older decks sometimes lack adequate footers. Adding them means concrete cutting and cure time.

Gutter modifications:

Attaching to a home often requires super gutter installation or existing gutter removal.

Demolition & Haul-Away

Tear-off of a storm-damaged cage adds disposal costs, typically $400–$1,200.

Landscaping restoration

Equipment access can affect sod and beds along the work path.

Electrical Relocation

Outlets, lights, or fans in the path of new framing need a licensed electrician.

Rescreening cost also depends on panel size. Large spans need stronger mesh, and that raises material cost beyond a basic per-square-foot rate.

We structure payments around project milestones rather than requiring the full amount upfront.

Receive a FREE Quote

Screen Enclosures Payment Plans

A typical schedule looks like this:

Deposit at contract signing to cover materials and permit submission
Progress payment once framing is set and inspected
Final payment after screening is complete and you have walked the finished enclosure

Florida law limits initial deposits on residential improvement contracts, and we follow those requirements. We accept check, ACH transfer, and major credit cards. Third-party financing through home improvement lenders is available for larger pool cage projects, with terms and rates set by the lender rather than by us. Insurance claims for hurricane damage are common in our area. We provide itemized documentation and photos formatted for adjusters, and we can work directly with your carrier on the scope of repair.

Proudly Serving Other Areas

While our home base is St. Cloud, our crews work throughout Osceola County and the surrounding Central Florida region. If you live nearby and need a new enclosure, a rescreen, or a repair, we're likely already working in your area

	Areas We Serve
Cities	Kissimmee, Harmony, Narcoossee, Poinciana, Celebration, Lake Nona, Orlando, Hunter’s Creek, Melbourne, and Palm Bay.

Travel distance doesn't change how we approach a job. The same materials, anchoring methods, and wind load considerations apply whether the property sits in downtown St. Cloud or a new subdivision off Narcoossee Road.

We handle a full range of work in these areas:

New screen enclosures for pools, patios, and lanais
Rescreening of existing aluminum frames
Screen door replacement and hardware adjustments
Storm damage repair, including bent or missing framing members
Pet-resistant screen and no-see-um mesh upgrades

Not sure if your address falls within our service range? Give us a call and we'll tell you directly. If a project sits outside what we can reasonably cover, we'll say so rather than stretch our schedule thin. Estimates are provided on-site, which means we measure the actual structure and account for existing slab conditions before quoting a price.

Frequently Asked Questions About Screen Enclosures Installation & Repair in St Cloud, FL

Pricing, permitting, build timelines, and screen material choices come up in nearly every conversation we have with homeowners in St. Cloud. Below are straightforward answers based on the projects we handle across Osceola County.

How much does a new screen enclosure cost in St. Cloud, Florida?

Yes. The City of St. Cloud requires a building permit for new screen enclosures, and unincorporated Osceola County has the same requirement. Permitting involves submitting engineered drawings that meet Florida Building Code wind load requirements for our region. Homes in flood zones or with existing footers may need additional documentation. We handle the permit application, engineering plans, and inspection scheduling as part of the project. If your property is in an HOA, you'll also need architectural approval before we can pull the permit

Do I need a permit to install a screen enclosure in St. Cloud?

Yes. Screen enclosures are permanent structures under the Florida Building Code, and a building permit is required for new construction in both the City of Kissimmee and unincorporated Osceola County. Permit applications generally require engineered drawings, a site survey or plot plan showing setbacks, and wind load calculations. Inspections typically include footer, framing, and final. If your property sits within an HOA, you will usually need architectural approval before the permit is filed. We handle the permit submittal and coordinate inspections as part of the project. Simple rescreening of an existing frame does not require a permit, since the structure itself is unchanged.

How long does it take to build a pool screen enclosure?

Construction itself usually takes 3 to 7 working days for a standard residential pool cage. The longer part of the timeline is permitting. Plan review in St. Cloud generally takes two to four weeks, though this varies with volume. From signed contract to final inspection, most homeowners should budget four to eight weeks. Rescreening and repair work moves much faster — often completed in one or two days with no permit required.

What is the average cost to rescreen a pool enclosure?

Rescreening typically costs $1.50 to $3.00 per square foot of screen area, or roughly $1,200 to $3,500 for a full pool cage. Cost depends on the mesh you select, the number of panels, and whether spline channels or hardware need replacement. Pet-resistant mesh and solar screen sit at the higher end. Partial rescreening is an option when only a few panels have failed. We price individual panel replacement separately, which often makes more sense than redoing the entire cage.

What types of screen materials are best for Florida weather?

18x14 fiberglass mesh is the standard choice for most enclosures. It's economical, resists UV breakdown reasonably well, and typically lasts five to eight years in direct sun. 20x20 "no-see-um" mesh uses a tighter weave to block the small biting insects common near Lake Tohopekaliga and East Lake Toho. Airflow is slightly reduced compared to standard mesh. Pet-resistant screen is built from heavier vinyl-coated polyester and holds up to claws and impact. We recommend it for lower panels and door sections in homes with dogs. Solar or privacy screen blocks 60% to 90% of incoming sunlight, which lowers surface temperatures on west-facing patios.

Can an existing screen enclosure be repaired or upgraded?

In most cases, yes. Aluminum frames often remain sound long after the mesh has deteriorated, so rescreening restores the enclosure without rebuilding it. We also replace bent or corroded frame members, reset loose anchors, install new door hardware and closers, and add pet doors to existing panels. Storm damage is frequently repairable panel by panel. Upgrades we perform on older structures include swapping standard mesh for no-see-um or solar screen, adding kickplates, and replacing worn screen doors with self-closing units. If corrosion has spread through multiple structural members or the enclosure predates current wind load standards, replacement is often the better investment. We'll tell you which situation you're in after an inspection.

We work to provide you with the best screen enclosure installation & repair services

We guarantee you the highest level of service, we have more than 20 years of experience. Get a free quote today!

(407) 337-9672

Hello! We’d like to hear from you

About

St. Cloud Screen Enclosures provides residential and commercial screen enclosure installation, repair, and rescreening throughout St. Cloud and Osceola County. We service pool cages, lanais, patios, porches, screen rooms, and custom aluminum enclosures, from torn screen panels and frame repairs to complete new installations. Free on-site estimates are available before work begins.

Services

Screen Enclosure Installation

Pool Cage Installation

Rescreening

Screen Enclosure Repair

Contact

407-337-9672

St Cloud, FL